eth2p-ethip4-ip4base-copblklistbase-dev.robot revision fcc77752
1# Copyright (c) 2019 Cisco and/or its affiliates.
2# Licensed under the Apache License, Version 2.0 (the "License");
3# you may not use this file except in compliance with the License.
4# You may obtain a copy of the License at:
5#
6#     http://www.apache.org/licenses/LICENSE-2.0
7#
8# Unless required by applicable law or agreed to in writing, software
9# distributed under the License is distributed on an "AS IS" BASIS,
10# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11# See the License for the specific language governing permissions and
12# limitations under the License.
13
14*** Settings ***
15| Resource | resources/libraries/robot/shared/default.robot
16| ...
17| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
18| ... | NIC_Virtual | ETH | IP4FWD | FEATURE | COPBLKLIST
19| ...
20| Suite Setup | Setup suite single link | scapy
21| Test Setup | Setup test
22| Test Teardown | Tear down test | packet_trace
23| ...
24| Test Template | Local Template
25| ...
26| Documentation | *COP Security IPv4 whitelist test cases*
27| ...
28| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology \
29| ... | with single links between nodes.
30| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on all links.
31| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and \
32| ... | static routes. COP security white-lists is applied on DUT1 ingress \
33| ... | interface from TG.
34| ... | *[Ver] TG verification:* Test IPv4 packets are sent in one direction \
35| ... | by TG on link to DUT1; on receive TG verifies packets for correctness \
36| ... | and drops as applicable.
37| ... | *[Ref] Applicable standard specifications:*
38
39*** Variables ***
40| @{plugins_to_enable}= | dpdk_plugin.so
41| ${nic_name}= | virtual
42| ${nic_driver}= | vfio-pci
43| ${overhead}= | ${0}
44
45*** Keywords ***
46| Local Template
47| | [Documentation]
48| | ... | [Ver] Make TG send IPv4 on its interface to DUT1; \
49| | ... | verify received IPv4 pkts are correct.
50| | ...
51| | ... | *Arguments:*
52| | ... | - frame_size - Framesize in Bytes in integer. Type: integer
53| | ... | - phy_cores - Number of physical cores. Type: integer
54| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
55| | ...
56| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
57| | ...
58| | Set Test Variable | \${frame_size}
59| | ...
60| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
61| | And Add PCI devices to all DUTs
62| | And Set Max Rate And Jumbo And Handle Multi Seg
63| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
64| | When Initialize layer driver | ${nic_driver}
65| | And Initialize IPv4 forwarding in circular topology
66| | And Add Fib Table | ${dut1} | 1
67| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE}
68| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1
69| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
70| | Then Packet transmission from port to port should fail
71| | ... | ${tg} | 100.0.0.2 | 200.0.0.2
72| | ... | ${tg_if1} | ${tg_if1_mac} | ${dut1_if1_mac}
73| | ... | ${tg_if2} | ${dut1_if2_mac} | ${tg_if2_mac}
74
75*** Test Cases ***
76| tc01-64B-ethip4-ip4base-copblklistbase-dev
77| | [Tags] | 64B
78| | frame_size=${64} | phy_cores=${0}
79