eth2p-ethip4lisp-ip4base-dev.robot revision e916ab4d
1# Copyright (c) 2019 Cisco and/or its affiliates.
2# Licensed under the Apache License, Version 2.0 (the "License");
3# you may not use this file except in compliance with the License.
4# You may obtain a copy of the License at:
5#
6#     http://www.apache.org/licenses/LICENSE-2.0
7#
8# Unless required by applicable law or agreed to in writing, software
9# distributed under the License is distributed on an "AS IS" BASIS,
10# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11# See the License for the specific language governing permissions and
12# limitations under the License.
13
14*** Settings ***
15| Resource | resources/libraries/robot/shared/default.robot
16|
17| Variables | resources/test_data/lisp/lisp.py
18|
19| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
20| ... | NIC_Virtual | IP4FWD | LISP_IP4o4 | DRV_VFIO_PCI
21| ... | ethip4lisp-ip4base
22|
23| Suite Setup | Setup suite single link | scapy
24| Test Setup | Setup test
25| Test Teardown | Tear down test | packet_trace
26|
27| Test Template | Local Template
28|
29| Documentation | *ip4-lisp-ip4 encapsulation test cases*
30|
31| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node\
32| ... | circular topology with single links between nodes.
33| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-LISP-IPv4-ICMPv4\
34| ... | on DUT1-TG, Eth-IPv4-ICMPv4 on TG-DUTn for IPv4 routing\
35| ... | over LISPoIPv4 tunnel.
36| ... | *[Cfg] DUT configuration:* DUT is configured with IPv4\
37| ... | routing and static routes. LISPoIPv4 tunnel is\
38| ... | configured between DUT1 and TG2.
39| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets\
40| ... | are sent by TG on if1 link to DUT1; on receive TG verifies\
41| ... | packets for correctness and their IPv4 src-addr, dst-addr\
42| ... | and MAC addresses.
43| ... | *[Ref] Applicable standard specifications:* RFC6830.
44
45*** Variables ***
46| @{plugins_to_enable}= | dpdk_plugin.so
47| ${crypto_type}= | ${None}
48| ${nic_name}= | virtual
49| ${nic_driver}= | vfio-pci
50| ${overhead}= | ${54}
51
52*** Keywords ***
53| Local Template
54| | [Documentation]
55| | ... | [Cfg] On DUT1 configure LISP.\
56| |
57| | ... | *Arguments:*
58| | ... | - frame_size - Framesize in Bytes in integer. Type: integer
59| | ... | - phy_cores - Number of physical cores. Type: integer
60| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
61| |
62| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
63| |
64| | Set Test Variable | \${frame_size}
65| |
66| | Given Set Max Rate And Jumbo
67| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
68| | And Pre-initialize layer driver | ${nic_driver}
69| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
70| | When Initialize layer driver | ${nic_driver}
71| | And Initialize layer interface
72| | And Configure topology for IPv4 LISP testing
73| | And Configure LISP in 2-node circular topology
74| | ... | ${dut1} | ${dut1_if2} | ${NONE}
75| | ... | ${duts_locator_set} | ${dut1_ip4_eid}
76| | ... | ${dut1_to_tg_ip4_static_adjacency}
77| | Then Send packet and verify LISP encap
78| | ... | ${tg} | ${tg_if1_ip4} | ${dst_ip4}
79| | ... | ${tg_if1} | ${tg_if1_mac} | ${dut1_if1_mac}
80| | ... | ${tg_if2} | ${dut1_if2_mac} | ${tg_if2_mac}
81| | ... | ${src_rloc4} | ${dst_rloc4}
82
83*** Test Cases ***
84| tc01-46B-ethip4lisp-ip4base-dev
85| | [Tags] | 46B
86| | frame_size=${46} | phy_cores=${0}
87