eth2p-ethip6lispgpe-ip4base-dev.robot revision d68951ac
1# Copyright (c) 2019 Cisco and/or its affiliates.
2# Licensed under the Apache License, Version 2.0 (the "License");
3# you may not use this file except in compliance with the License.
4# You may obtain a copy of the License at:
5#
6#     http://www.apache.org/licenses/LICENSE-2.0
7#
8# Unless required by applicable law or agreed to in writing, software
9# distributed under the License is distributed on an "AS IS" BASIS,
10# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11# See the License for the specific language governing permissions and
12# limitations under the License.
13
14*** Settings ***
15| Resource | resources/libraries/robot/shared/default.robot
16|
17| Variables | resources/test_data/lisp/lisp.py
18|
19| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
20| ... | NIC_Virtual | IP6FWD | LISPGPE_IP4o6 | DRV_VFIO_PCI
21|
22| Suite Setup | Setup suite single link | scapy
23| Test Setup | Setup test
24| Test Teardown | Tear down test | packet_trace
25|
26| Test Template | Local Template
27|
28| Documentation | *ip6-lispgpe-ip4 encapsulation test cases*
29|
30| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular\
31| ... | topology with single links between nodes.
32| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-LISPGPE-IPv4-ICMPv4\
33| ... |  on DUT1-TG, Eth-IPv4-ICMPv4 on TG-DUTn for IPv6 routing\
34| ... |  over LISPoIPv6 tunnel.
35| ... | *[Cfg] DUT configuration:* DUT1 and TG(if2) are configured\
36| ... | with IPv6 routing and static routes. LISPoIPv6 tunnel is\
37| ... | configured between DUT1 and TG.
38| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are\
39| ... | sent in TG->DUT(if1); On receive TG(if2) verifies packets for\
40| ... | correctness and their IPv4 src-addr, dst-addr and MAC addresses.
41| ... | *[Ref] Applicable standard specifications:* RFC6830.
42
43*** Variables ***
44| @{plugins_to_enable}= | dpdk_plugin.so
45| ${crypto_type}= | ${None}
46| ${nic_name}= | virtual
47| ${nic_driver}= | vfio-pci
48| ${overhead}= | ${54}
49| ${ot_mode}= | 4to6
50| ${is_gpe}= | ${1}
51
52*** Keywords ***
53| Local Template
54| | [Documentation]
55| | ... | [Cfg] On DUT1 configure LISP.\
56| |
57| | ... | *Arguments:*
58| | ... | - frame_size - Framesize in Bytes in integer. Type: integer
59| | ... | - phy_cores - Number of physical cores. Type: integer
60| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
61| |
62| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
63| |
64| | Set Test Variable | \${frame_size}
65| |
66| | Given Set Max Rate And Jumbo
67| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
68| | And Pre-initialize layer driver | ${nic_driver}
69| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
70| | When Initialize layer driver | ${nic_driver}
71| | And Initialize layer interface
72| | And Configure topology for IPv4 LISPoIP6 testing
73| | And Vpp All RA Suppress Link Layer | ${nodes}
74| | And Configure LISP in 2-node circular topology
75| | ... | ${dut1} | ${dut1_if2} | ${NONE}
76| | ... | ${duts_locator_set} | ${dut1_ip4o6_eid}
77| | ... | ${dut1_ip4o6_static_adjacency} | ${is_gpe}
78| | Then Send packet and verify LISPoTunnel encap
79| | ... | ${tg} | ${tg_if1_ip4} | ${dst_ip4}
80| | ... | ${tg_if1} | ${tg_if1_mac} | ${dut1_if1_mac}
81| | ... | ${tg_if2} | ${dut1_if2_mac} | ${tg_if2_mac}
82| | ... | ${src_rloc6} | ${dst_rloc6} | ${ot_mode}
83
84*** Test Cases ***
85| tc01-46B-ethip6lispgpe-ip4base-dev
86| | [Tags] | 46B
87| | frame_size=${46} | phy_cores=${0}
88