eth2p-avf-dot1q-l2bdbasemaclrn-gbp-dev.robot revision ac89ba8a
1# Copyright (c) 2019 Cisco and/or its affiliates.
2# Licensed under the Apache License, Version 2.0 (the "License");
3# you may not use this file except in compliance with the License.
4# You may obtain a copy of the License at:
5#
6#     http://www.apache.org/licenses/LICENSE-2.0
7#
8# Unless required by applicable law or agreed to in writing, software
9# distributed under the License is distributed on an "AS IS" BASIS,
10# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11# See the License for the specific language governing permissions and
12# limitations under the License.
13
14*** Settings ***
15| Resource | resources/libraries/robot/shared/default.robot
16| ...
17| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
18| ... | NIC_Virtual | DOT1Q | L2BDMACLRN | BASE | DRV_AVF | GBP
19| ...
20| Suite Setup | Setup suite single link | avf | scapy
21| Suite Teardown | Tear down suite
22| Test Setup | Setup test
23| Test Teardown | Tear down test | packet_trace
24| ...
25| Test Template | Local template
26| ...
27| Documentation | *L2BD with IEEE 802.1Q and GBP test cases*
28| ...
29| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
30| ... | with single links between nodes.
31| ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4 for L2 switching of IPv4. \
32| ... | IEEE 802.1Q tagging is applied on both links TG-DUT1 .
33| ... | *[Cfg] DUT configuration:* DUT1 is configured with:\
34| ... | 2 VLAN subinterfaces (VID 200 and 300),\
35| ... | 1 L2 BD with the 2 VLAN subinterfaces and a BVI,\
36| ... | 1 GBP L3 RD,\
37| ... | 1 GBP L2 BD with the L2 BD,\
38| ... | 1 GBP EPG EPG-1 with sclass 100, the GBP L2 BD and L3 RD,\
39| ... | 2 GBP external EP in EPG-1,\
40| ... | 2 external subnets with sclass 200 and 300,\
41| ... | Contracts allowing full communications between the 2 external subnets.\
42| ... | DUT1 tested with ${nic_name} with VF enabled.
43| ... | *[Ver] TG verification:* Test IPv4 packets are sent in one direction \
44| ... | by TG on link to DUT1; on receive TG verifies packets for correctness \
45| ... | and drops as applicable.
46| ... | *[Ref] Applicable standard specifications:* IEEE 802.1q.
47
48*** Variables ***
49| @{plugins_to_enable}= | avf_plugin.so | gbp_plugin.so | acl_plugin.so
50| ${crypto_type}= | ${None}
51| ${nic_name}= | virtual
52| ${nic_driver}= | avf
53| ${overhead}= | ${4}
54
55*** Keywords ***
56| Local template
57| | [Documentation]
58| | ... | [Ver] Make TG send ICMPv4 Echo Reqs in both directions between two\
59| | ... | of its interfaces to be switched by DUT to and from docker; verify\
60| | ... | all packets are received.
61| | ...
62| | ... | *Arguments:*
63| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
64| | ... | Type: integer, string
65| | ... | - phy_cores - Number of physical cores. Type: integer
66| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
67| | ...
68| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
69| | ...
70| | Set Test Variable | \${frame_size}
71| | ...
72| | Given Set Max Rate And Jumbo
73| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
74| | And Pre-initialize layer driver | ${nic_driver}
75| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
76| | When Initialize layer driver | ${nic_driver}
77| | And Initialize layer interface
78| | And Initialize layer dot1q
79| | And Initialize GBP routing domains
80| | Then Send packet and verify headers
81| | ... | ${tg} | 10.10.10.2 | 20.20.20.2
82| | ... | ${tg_if1} | ${tg_if1_mac} | ba:dc:00:ff:ee:01
83| | ... | ${tg_if2} | ba:dc:00:ff:ee:01 | ${tg_if2_mac}
84| | ... | traffic_script=send_ip_check_headers
85
86*** Test Cases ***
87| tc01-64B-avf-dot1q-l2bdbasemaclrn-gbp-dev
88| | [Tags] | 64B | 1C
89| | frame_size=${64} | phy_cores=${0}
90