10ge2p1x710-dot1q--ethip4vxlan-l2bdscale1l2bd1vlan1vxlan-ndrpdr.robot revision ac89ba8a
1# Copyright (c) 2019 Cisco and/or its affiliates.
2# Licensed under the Apache License, Version 2.0 (the "License");
3# you may not use this file except in compliance with the License.
4# You may obtain a copy of the License at:
5#
6#     http://www.apache.org/licenses/LICENSE-2.0
7#
8# Unless required by applicable law or agreed to in writing, software
9# distributed under the License is distributed on an "AS IS" BASIS,
10# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11# See the License for the specific language governing permissions and
12# limitations under the License.
13
14*** Settings ***
15| Resource | resources/libraries/robot/shared/default.robot
16| ...
17| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
18| ... | NIC_Intel-X710 | L2BDMACLRN | SCALE | L2BD_1 | DOT1Q | VLAN_1
19| ... | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY | VXLAN_1 | DRV_VFIO_PCI
20| ...
21| Suite Setup | Setup suite single link | performance
22| Suite Teardown | Tear down suite | performance
23| Test Setup | Setup test
24| Test Teardown | Tear down test | performance
25| ...
26| Test Template | Local Template
27| ...
28| Documentation | *RFC2544: Pkt throughput L2BD with IEEE 802.1Q and VXLANoIPv4
29| ... | test cases*
30| ...
31| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
32| ... | with single links between nodes.
33| ... | *[Enc] Packet Encapsulations:* Eth-Dot1Q-IPv4 for L2 switching of IPv4\
34| ... | on TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUTs.
35| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with 1 L2\
36| ... | bridge domains. VXLAN tunnels are configured between L2BDs on DUT1 and\
37| ... | DUT2. DUT1 and DUT2 tested with ${nic_name}.\
38| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
39| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
40| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
41| ... | of packets transmitted. NDR and PDR are discovered for different\
42| ... | Ethernet L2 frame sizes using MLRsearch library.\
43| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
44| ... | contains two L3 flow-groups (flow-group per direction, up to 64,5k\
45| ... | flows per flow-group) with all packets containing Ethernet header, IEEE\
46| ... | 802.1Q header, IPv4 header with IP protocol=61 and static payload.\
47| ... | MAC addresses are matching MAC addresses of the TG node interfaces.
48| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348.
49
50*** Variables ***
51| @{plugins_to_enable}= | dpdk_plugin.so
52| ${crypto_type}= | ${None}
53| ${nic_name}= | Intel-X710
54| ${nic_driver}= | vfio-pci
55| ${osi_layer}= | L2
56| ${overhead}= | ${50}
57# Traffic profile:
58| ${traffic_profile}= | trex-sl-3n-dot1qip4-vlan1ip4src254ip4dst254
59# Number of VXLAN tunnels
60| ${vxlan_count}= | ${1}
61
62*** Keywords ***
63| Local Template
64| | [Documentation]
65| | ... | [Cfg] Each DUT runs L2BD forwarding config with VLAN and VXLAN and\
66| | ... | uses ${phy_cores} physical core(s) for worker threads.
67| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
68| | ...
69| | ... | *Arguments:*
70| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
71| | ... | Type: integer, string
72| | ... | - phy_cores - Number of physical cores. Type: integer
73| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
74| | ...
75| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
76| | ...
77| | Set Test Variable | \${frame_size}
78| | ...
79| | Given Set Max Rate And Jumbo
80| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
81| | And Pre-initialize layer driver | ${nic_driver}
82| | And Apply startup configuration on all VPP DUTs
83| | When Initialize layer driver | ${nic_driver}
84| | And Initialize layer interface
85| | And Initialize L2 bridge domain with VLAN and VXLANoIPv4 in 3-node circular topology
86| | ... | vxlan_count=${vxlan_count}
87| | Then Find NDR and PDR intervals using optimized search
88
89*** Test Cases ***
90| tc01-64B-1c-dot1q--ethip4vxlan-l2bdscale1l2bd1vlan1vxlan-ndrpdr
91| | [Tags] | 64B | 1C
92| | frame_size=${64} | phy_cores=${1}
93
94| tc02-64B-2c-dot1q--ethip4vxlan-l2bdscale1l2bd1vlan1vxlan-ndrpdr
95| | [Tags] | 64B | 2C
96| | frame_size=${64} | phy_cores=${2}
97
98| tc03-64B-4c-dot1q--ethip4vxlan-l2bdscale1l2bd1vlan1vxlan-ndrpdr
99| | [Tags] | 64B | 4C
100| | frame_size=${64} | phy_cores=${4}
101
102| tc04-1518B-1c-dot1q--ethip4vxlan-l2bdscale1l2bd1vlan1vxlan-ndrpdr
103| | [Tags] | 1518B | 1C
104| | frame_size=${1518} | phy_cores=${1}
105
106| tc05-1518B-2c-dot1q--ethip4vxlan-l2bdscale1l2bd1vlan1vxlan-ndrpdr
107| | [Tags] | 1518B | 2C
108| | frame_size=${1518} | phy_cores=${2}
109
110| tc06-1518B-4c-dot1q--ethip4vxlan-l2bdscale1l2bd1vlan1vxlan-ndrpdr
111| | [Tags] | 1518B | 4C
112| | frame_size=${1518} | phy_cores=${4}
113
114| tc07-9000B-1c-dot1q--ethip4vxlan-l2bdscale1l2bd1vlan1vxlan-ndrpdr
115| | [Tags] | 9000B | 1C
116| | frame_size=${9000} | phy_cores=${1}
117
118| tc08-9000B-2c-dot1q--ethip4vxlan-l2bdscale1l2bd1vlan1vxlan-ndrpdr
119| | [Tags] | 9000B | 2C
120| | frame_size=${9000} | phy_cores=${2}
121
122| tc09-9000B-4c-dot1q--ethip4vxlan-l2bdscale1l2bd1vlan1vxlan-ndrpdr
123| | [Tags] | 9000B | 4C
124| | frame_size=${9000} | phy_cores=${4}
125
126| tc10-IMIX-1c-dot1q--ethip4vxlan-l2bdscale1l2bd1vlan1vxlan-ndrpdr
127| | [Tags] | IMIX | 1C
128| | frame_size=IMIX_v4_1 | phy_cores=${1}
129
130| tc11-IMIX-2c-dot1q--ethip4vxlan-l2bdscale1l2bd1vlan1vxlan-ndrpdr
131| | [Tags] | IMIX | 2C
132| | frame_size=IMIX_v4_1 | phy_cores=${2}
133
134| tc12-IMIX-4c-dot1q--ethip4vxlan-l2bdscale1l2bd1vlan1vxlan-ndrpdr
135| | [Tags] | IMIX | 4C
136| | frame_size=IMIX_v4_1 | phy_cores=${4}
137