10ge2p1x710-ethip6-ip6base-copwhtlistbase-ndrpdr.robot revision e916ab4d
1# Copyright (c) 2019 Cisco and/or its affiliates.
2# Licensed under the Apache License, Version 2.0 (the "License");
3# you may not use this file except in compliance with the License.
4# You may obtain a copy of the License at:
5#
6#     http://www.apache.org/licenses/LICENSE-2.0
7#
8# Unless required by applicable law or agreed to in writing, software
9# distributed under the License is distributed on an "AS IS" BASIS,
10# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11# See the License for the specific language governing permissions and
12# limitations under the License.
13
14*** Settings ***
15| Resource | resources/libraries/robot/shared/default.robot
16| Library | resources.libraries.python.Cop
17|
18| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
19| ... | NIC_Intel-X710 | ETH | IP6FWD | FEATURE | COPWHLIST | DRV_VFIO_PCI
20| ... | ethip6-ip6base-copwhtlistbase
21|
22| Suite Setup | Setup suite single link | performance
23| Suite Teardown | Tear down suite | performance
24| Test Setup | Setup test
25| Test Teardown | Tear down test | performance
26|
27| Test Template | Local Template
28|
29| Documentation | *RFC2544: Pkt throughput IPv6 whitelist test cases*
30|
31| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
32| ... | with single links between nodes.
33| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing.
34| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6
35| ... | routing, two static IPv6 /64 routes and IPv6 COP security whitelist
36| ... | ingress /64 filter entries applied on links TG - DUT1 and DUT2 - TG.
37| ... | DUT1 and DUT2 tested with ${nic_name}.\
38| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
39| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
40| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
41| ... | of packets transmitted. NDR and PDR are discovered for different\
42| ... | Ethernet L2 frame sizes using MLRsearch library.\
43| ... | Test packets are generated by TG on
44| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
45| ... | (flow-group per direction, 253 flows per flow-group) with all packets
46| ... | containing Ethernet header, IPv6 header and static
47| ... | payload. MAC addresses are matching MAC addresses of the TG node
48| ... | interfaces.
49| ... | *[Ref] Applicable standard specifications:* RFC2544.
50
51*** Variables ***
52| @{plugins_to_enable}= | dpdk_plugin.so
53| ${crypto_type}= | ${None}
54| ${nic_name}= | Intel-X710
55| ${nic_driver}= | vfio-pci
56| ${osi_layer}= | L3
57| ${overhead}= | ${0}
58# Traffic profile:
59| ${traffic_profile}= | trex-sl-3n-ethip6-ip6src253
60
61*** Keywords ***
62| Local Template
63| | [Documentation]
64| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with
65| | ... | ${phy_cores} phy core(s).
66| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
67| |
68| | ... | *Arguments:*
69| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
70| | ... | Type: integer, string
71| | ... | - phy_cores - Number of physical cores. Type: integer
72| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
73| |
74| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
75| |
76| | Set Test Variable | \${frame_size}
77| |
78| | Given Set Max Rate And Jumbo
79| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
80| | And Pre-initialize layer driver | ${nic_driver}
81| | And Apply startup configuration on all VPP DUTs
82| | When Initialize layer driver | ${nic_driver}
83| | And Initialize layer interface
84| | And Initialize IPv6 forwarding in circular topology
85| | And Add Fib Table | ${dut1} | 1 | ipv6=${TRUE}
86| | And Vpp Route Add | ${dut1} | 2001:1:: | 64 | vrf=1 | local=${TRUE}
87| | And Add Fib Table | ${dut2} | 1 | ipv6=${TRUE}
88| | And Vpp Route Add | ${dut2} | 2001:2:: | 64 | vrf=1 | local=${TRUE}
89| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1
90| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1
91| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
92| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
93| | Then Find NDR and PDR intervals using optimized search
94
95*** Test Cases ***
96| tc01-78B-1c-ethip6-ip6base-copwhtlistbase-ndrpdr
97| | [Tags] | 78B | 1C
98| | frame_size=${78} | phy_cores=${1}
99
100| tc02-78B-2c-ethip6-ip6base-copwhtlistbase-ndrpdr
101| | [Tags] | 78B | 2C
102| | frame_size=${78} | phy_cores=${2}
103
104| tc03-78B-4c-ethip6-ip6base-copwhtlistbase-ndrpdr
105| | [Tags] | 78B | 4C
106| | frame_size=${78} | phy_cores=${4}
107
108| tc04-1518B-1c-ethip6-ip6base-copwhtlistbase-ndrpdr
109| | [Tags] | 1518B | 1C
110| | frame_size=${1518} | phy_cores=${1}
111
112| tc05-1518B-2c-ethip6-ip6base-copwhtlistbase-ndrpdr
113| | [Tags] | 1518B | 2C
114| | frame_size=${1518} | phy_cores=${2}
115
116| tc06-1518B-4c-ethip6-ip6base-copwhtlistbase-ndrpdr
117| | [Tags] | 1518B | 4C
118| | frame_size=${1518} | phy_cores=${4}
119
120| tc07-9000B-1c-ethip6-ip6base-copwhtlistbase-ndrpdr
121| | [Tags] | 9000B | 1C
122| | frame_size=${9000} | phy_cores=${1}
123
124| tc08-9000B-2c-ethip6-ip6base-copwhtlistbase-ndrpdr
125| | [Tags] | 9000B | 2C
126| | frame_size=${9000} | phy_cores=${2}
127
128| tc09-9000B-4c-ethip6-ip6base-copwhtlistbase-ndrpdr
129| | [Tags] | 9000B | 4C
130| | frame_size=${9000} | phy_cores=${4}
131
132| tc10-IMIX-1c-ethip6-ip6base-copwhtlistbase-ndrpdr
133| | [Tags] | IMIX | 1C
134| | frame_size=IMIX_v4_1 | phy_cores=${1}
135
136| tc11-IMIX-2c-ethip6-ip6base-copwhtlistbase-ndrpdr
137| | [Tags] | IMIX | 2C
138| | frame_size=IMIX_v4_1 | phy_cores=${2}
139
140| tc12-IMIX-4c-ethip6-ip6base-copwhtlistbase-ndrpdr
141| | [Tags] | IMIX | 4C
142| | frame_size=IMIX_v4_1 | phy_cores=${4}
143