10ge2p1x710-ethip6lispip4-ip6base-ndrpdr.robot revision d68951ac
1# Copyright (c) 2019 Cisco and/or its affiliates.
2# Licensed under the Apache License, Version 2.0 (the "License");
3# you may not use this file except in compliance with the License.
4# You may obtain a copy of the License at:
5#
6#     http://www.apache.org/licenses/LICENSE-2.0
7#
8# Unless required by applicable law or agreed to in writing, software
9# distributed under the License is distributed on an "AS IS" BASIS,
10# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11# See the License for the specific language governing permissions and
12# limitations under the License.
13
14*** Settings ***
15| Resource | resources/libraries/robot/shared/default.robot
16| Resource | resources/libraries/robot/overlay/lisp_static_adjacency.robot
17| Variables | resources/test_data/lisp/performance/lisp_static_adjacency.py
18|
19| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
20| ... | NIC_Intel-X710 | IP6FWD | ENCAP | LISP | IP4UNRLAY | IP6OVRLAY
21| ... | DRV_VFIO_PCI
22|
23| Suite Setup | Setup suite single link | performance
24| Suite Teardown | Tear down suite | performance
25| Test Setup | Setup test
26| Test Teardown | Tear down test | performance
27|
28| Test Template | Local Template
29|
30| Documentation | *RFC6830: Pkt throughput Lisp test cases*
31|
32| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
33| ... | with single links between nodes.\
34| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-LISP-IPv4 on DUT1-DUT2,\
35| ... | Eth-IPv6 on TG-DUTn for IPv6 routing over LISPoIPv4 tunnel.\
36| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\
37| ... | routing and static routes. LISPoIPv4 tunnel is configured between\
38| ... | DUT1 and DUT2. DUT1 and DUT2 tested with ${nic_name}.\
39| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
40| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
41| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
42| ... | of packets transmitted. NDR and PDR are discovered for different\
43| ... | Ethernet L2 frame sizes using MLRsearch library.\
44| ... | *[Ref] Applicable standard specifications:* RFC6830.
45
46*** Variables ***
47| @{plugins_to_enable}= | dpdk_plugin.so
48| ${crypto_type}= | ${None}
49| ${nic_name}= | Intel-X710
50| ${nic_driver}= | vfio-pci
51| ${osi_layer}= | L3
52| ${overhead}= | 48
53# Traffic profile:
54| ${traffic_profile}= | trex-sl-3n-ethip6-ip6src253
55
56*** Keywords ***
57| Local Template
58| | [Documentation]
59| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist\
60| | ... | filters config.\
61| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.\
62| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
63| |
64| | ... | *Arguments:*
65| | ... | - frame_size - Frame size in Bytes as integer or string (IMIX_v4_1).
66| | ... |   Type: integer, string
67| | ... | - phy_cores - Number of physical cores. Type: integer
68| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
69| |
70| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
71| |
72| | Set Test Variable | \${frame_size}
73| |
74| | Given Set Max Rate And Jumbo
75| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
76| | And Pre-initialize layer driver | ${nic_driver}
77| | And Apply startup configuration on all VPP DUTs
78| | When Initialize layer driver | ${nic_driver}
79| | And Initialize layer interface
80| | And Initialize LISP IPv6 over IPv4 forwarding in 3-node circular topology
81| | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4}
82| | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4}
83| | And Configure LISP topology in 3-node circular topology
84| | ... | ${dut1} | ${dut1_if2} | ${NONE}
85| | ... | ${dut2} | ${dut2_if1} | ${NONE}
86| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid}
87| | ... | ${dut1_ip6o4_static_adjacency} | ${dut2_ip6o4_static_adjacency}
88| | Then Find NDR and PDR intervals using optimized search
89
90*** Test Cases ***
91| tc01-78B-1c-ethip6lispip4-ip6base-ndrpdr
92| | [Tags] | 78B | 1C
93| | frame_size=${78} | phy_cores=${1}
94
95| tc02-78B-2c-ethip6lispip4-ip6base-ndrpdr
96| | [Tags] | 78B | 2C
97| | frame_size=${78} | phy_cores=${2}
98
99| tc03-78B-4c-ethip6lispip4-ip6base-ndrpdr
100| | [Tags] | 78B | 4C
101| | frame_size=${78} | phy_cores=${4}
102
103| tc04-1518B-1c-ethip6lispip4-ip6base-ndrpdr
104| | [Tags] | 1518B | 1C
105| | frame_size=${1518} | phy_cores=${1}
106
107| tc05-1518B-2c-ethip6lispip4-ip6base-ndrpdr
108| | [Tags] | 1518B | 2C
109| | frame_size=${1518} | phy_cores=${2}
110
111| tc06-1518B-4c-ethip6lispip4-ip6base-ndrpdr
112| | [Tags] | 1518B | 4C
113| | frame_size=${1518} | phy_cores=${4}
114
115| tc07-9000B-1c-ethip6lispip4-ip6base-ndrpdr
116| | [Tags] | 9000B | 1C
117| | frame_size=${9000} | phy_cores=${1}
118
119| tc08-9000B-2c-ethip6lispip4-ip6base-ndrpdr
120| | [Tags] | 9000B | 2C
121| | frame_size=${9000} | phy_cores=${2}
122
123| tc09-9000B-4c-ethip6lispip4-ip6base-ndrpdr
124| | [Tags] | 9000B | 4C
125| | frame_size=${9000} | phy_cores=${4}
126
127| tc10-IMIX-1c-ethip6lispip4-ip6base-ndrpdr
128| | [Tags] | IMIX | 1C
129| | frame_size=IMIX_v4_1 | phy_cores=${1}
130
131| tc11-IMIX-2c-ethip6lispip4-ip6base-ndrpdr
132| | [Tags] | IMIX | 2C
133| | frame_size=IMIX_v4_1 | phy_cores=${2}
134
135| tc12-IMIX-4c-ethip6lispip4-ip6base-ndrpdr
136| | [Tags] | IMIX | 4C
137| | frame_size=IMIX_v4_1 | phy_cores=${4}
138