10ge2p1x710-ethip6lispip6-ip6base-ndrpdr.robot revision e916ab4d
1# Copyright (c) 2019 Cisco and/or its affiliates.
2# Licensed under the Apache License, Version 2.0 (the "License");
3# you may not use this file except in compliance with the License.
4# You may obtain a copy of the License at:
5#
6#     http://www.apache.org/licenses/LICENSE-2.0
7#
8# Unless required by applicable law or agreed to in writing, software
9# distributed under the License is distributed on an "AS IS" BASIS,
10# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11# See the License for the specific language governing permissions and
12# limitations under the License.
13
14*** Settings ***
15| Resource | resources/libraries/robot/shared/default.robot
16| Resource | resources/libraries/robot/overlay/lisp_static_adjacency.robot
17| Variables | resources/test_data/lisp/performance/lisp_static_adjacency.py
18|
19| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
20| ... | NIC_Intel-X710 | IP6FWD | ENCAP | LISP | IP6UNRLAY | IP6OVRLAY
21| ... | DRV_VFIO_PCI
22| ... | ethip6lispip6-ip6base
23|
24| Suite Setup | Setup suite single link | performance
25| Suite Teardown | Tear down suite | performance
26| Test Setup | Setup test
27| Test Teardown | Tear down test | performance
28|
29| Test Template | Local Template
30|
31| Documentation | *RFC6830: Pkt throughput Lisp test cases*
32|
33| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
34| ... | with single links between nodes.\
35| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-LISP-IPv6 on DUT1-DUT2,\
36| ... | Eth-IPv6 on TG-DUTn for IPv6 routing over LISPoIPv6 tunnel.\
37| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\
38| ... | routing and static routes. LISPoIPv6 tunnel is configured between\
39| ... | DUT1 and DUT2. DUT1 and DUT2 tested with ${nic_name}.\
40| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
41| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
42| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
43| ... | of packets transmitted. NDR and PDR are discovered for different\
44| ... | Ethernet L2 frame sizes using MLRsearch library.\
45| ... | *[Ref] Applicable standard specifications:* RFC6830.
46
47*** Variables ***
48| @{plugins_to_enable}= | dpdk_plugin.so
49| ${crypto_type}= | ${None}
50| ${nic_name}= | Intel-X710
51| ${nic_driver}= | vfio-pci
52| ${osi_layer}= | L3
53| ${overhead}= | 8
54# Traffic profile:
55| ${traffic_profile}= | trex-sl-3n-ethip6-ip6src253
56
57*** Keywords ***
58| Local Template
59| | [Documentation]
60| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist\
61| | ... | filters config.\
62| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.\
63| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
64| |
65| | ... | *Arguments:*
66| | ... | - frame_size - Frame size in Bytes as integer or string (IMIX_v4_1).
67| | ... |   Type: integer, string
68| | ... | - phy_cores - Number of physical cores. Type: integer
69| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
70| |
71| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
72| |
73| | Set Test Variable | \${frame_size}
74| |
75| | Given Set Max Rate And Jumbo
76| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
77| | And Pre-initialize layer driver | ${nic_driver}
78| | And Apply startup configuration on all VPP DUTs
79| | When Initialize layer driver | ${nic_driver}
80| | And Initialize layer interface
81| | And Initialize LISP IPv6 forwarding in 3-node circular topology
82| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6}
83| | ... | ${dut2_to_tg_ip6} | ${prefix6}
84| | And Configure LISP topology in 3-node circular topology
85| | ... | ${dut1} | ${dut1_if2} | ${NONE}
86| | ... | ${dut2} | ${dut2_if1} | ${NONE}
87| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid}
88| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency}
89| | Then Find NDR and PDR intervals using optimized search
90
91*** Test Cases ***
92| tc01-78B-1c-ethip6lispip6-ip6base-ndrpdr
93| | [Tags] | 78B | 1C
94| | frame_size=${78} | phy_cores=${1}
95
96| tc02-78B-2c-ethip6lispip6-ip6base-ndrpdr
97| | [Tags] | 78B | 2C
98| | frame_size=${78} | phy_cores=${2}
99
100| tc03-78B-4c-ethip6lispip6-ip6base-ndrpdr
101| | [Tags] | 78B | 4C
102| | frame_size=${78} | phy_cores=${4}
103
104| tc04-1518B-1c-ethip6lispip6-ip6base-ndrpdr
105| | [Tags] | 1518B | 1C
106| | frame_size=${1518} | phy_cores=${1}
107
108| tc05-1518B-2c-ethip6lispip6-ip6base-ndrpdr
109| | [Tags] | 1518B | 2C
110| | frame_size=${1518} | phy_cores=${2}
111
112| tc06-1518B-4c-ethip6lispip6-ip6base-ndrpdr
113| | [Tags] | 1518B | 4C
114| | frame_size=${1518} | phy_cores=${4}
115
116| tc07-9000B-1c-ethip6lispip6-ip6base-ndrpdr
117| | [Tags] | 9000B | 1C
118| | frame_size=${9000} | phy_cores=${1}
119
120| tc08-9000B-2c-ethip6lispip6-ip6base-ndrpdr
121| | [Tags] | 9000B | 2C
122| | frame_size=${9000} | phy_cores=${2}
123
124| tc09-9000B-4c-ethip6lispip6-ip6base-ndrpdr
125| | [Tags] | 9000B | 4C
126| | frame_size=${9000} | phy_cores=${4}
127
128| tc10-IMIX-1c-ethip6lispip6-ip6base-ndrpdr
129| | [Tags] | IMIX | 1C
130| | frame_size=IMIX_v4_1 | phy_cores=${1}
131
132| tc11-IMIX-2c-ethip6lispip6-ip6base-ndrpdr
133| | [Tags] | IMIX | 2C
134| | frame_size=IMIX_v4_1 | phy_cores=${2}
135
136| tc12-IMIX-4c-ethip6lispip6-ip6base-ndrpdr
137| | [Tags] | IMIX | 4C
138| | frame_size=IMIX_v4_1 | phy_cores=${4}
139