2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm1t-testpmd-reconf.robot revision e916ab4d
1# Copyright (c) 2019 Cisco and/or its affiliates.
2# Licensed under the Apache License, Version 2.0 (the "License");
3# you may not use this file except in compliance with the License.
4# You may obtain a copy of the License at:
5#
6#     http://www.apache.org/licenses/LICENSE-2.0
7#
8# Unless required by applicable law or agreed to in writing, software
9# distributed under the License is distributed on an "AS IS" BASIS,
10# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11# See the License for the specific language governing permissions and
12# limitations under the License.
13
14*** Settings ***
15| Resource | resources/libraries/robot/shared/default.robot
16|
17| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | RECONF
18| ... | NIC_Intel-X710 | L2BDMACLRN | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY
19| ... | VHOST | VM | VHOST_1024 | VXLAN | DOT1Q | NF_DENSITY | NF_TESTPMD
20| ... | CHAIN | 10R1C | 1_ADDED_CHAIN | 10VM1T | DRV_VFIO_PCI
21| ... | dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm1t-testpmd
22|
23| Suite Setup | Setup suite single link | performance
24| Suite Teardown | Tear down suite | performance
25| Test Setup | Setup test
26| Test Teardown | Tear down test | performance | vhost
27|
28| Test Template | Local Template
29|
30| Documentation | *RFC2544: Packet loss L2BD test cases with Dot1Q and
31| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.*
32|
33| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
34| ... | with single links between nodes.
35| ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for L2\
36| ... | switching of IPv4. Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is applied on link\
37| ... | between DUT1 and TG.
38| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
39| ... | domain and MAC learning enabled. Qemu VNFs are connected\
40| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc\
41| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is\
42| ... | tested with ${nic_name}.
43| ... | *[Ver] TG verification:* TG finds and throughput NDR (Non Drop\
44| ... | Rate) with zero packet loss tolerance, then measured loss at this load\
45| ... | while additional chain is configured.\
46| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
47| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per\
48| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4\
49| ... | header, UPD header, VXLAN header and static payload. MAC addresses are\
50| ... | matching MAC addresses of the TG node interfaces.
51| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348.
52
53*** Variables ***
54| @{plugins_to_enable}= | dpdk_plugin.so
55| ${crypto_type}= | ${None}
56| ${nic_name}= | Intel-X710
57| ${nic_driver}= | vfio-pci
58| ${osi_layer}= | L3
59| ${overhead}= | ${54}
60| ${nf_dtcr}= | ${2}
61| ${nf_dtc}= | ${0.5}
62| ${nf_chains}= | ${10}
63| ${nf_added_chains}= | ${1}
64| ${nf_nodes}= | ${1}
65# Traffic profile:
66| ${traffic_profile}=
67| ... | trex-sl-dot1qip4vxlan-ip4src${nf_chains}udpsrcrnd
68
69*** Keywords ***
70| Local Template
71| | [Documentation]
72| | ... | [Cfg] DUT runs Dot1Q-IP4-Vxlan L2BD switching config.\
73| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
74| | ... | [Ver] Measure packet loss during reconfig at NDR load.\
75| |
76| | ... | *Arguments:*
77| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
78| | ... | Type: integer, string
79| | ... | - phy_cores - Number of worker threads to be used. Type: integer
80| | ... | - rxq - Number of Rx queues to be used. Type: integer
81| |
82| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
83| |
84| | Set Test Variable | \${frame_size}
85| |
86| | ${nf_total_chains}= | Evaluate | ${nf_chains} + ${nf_added_chains}
87| | Given Set Max Rate And Jumbo
88| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
89| | And Pre-initialize layer driver | ${nic_driver}
90| | And Apply startup configuration on all VPP DUTs
91| | When Initialize layer driver | ${nic_driver}
92| | And Initialize layer interface
93| | ... | count=${nf_total_chains}
94| | And Initialize layer dot1q
95| | ... | count=${nf_chains} | vlan_per_chain=${False}
96| | And Initialize layer ip4vxlan
97| | ... | count=${nf_chains}
98| | And Initialize L2 bridge domains for multiple chains with Vhost-User
99| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes}
100| | And Configure chains of NFs connected via vhost-user
101| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | jumbo=${jumbo}
102| | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=testpmd_io
103| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch
104| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0
105| | Start Traffic on Background | ${unidirectional_throughput}pps
106| | And Initialize layer dot1q
107| | ... | count=${nf_total_chains} | vlan_per_chain=${False}
108| | ... | start=${nf_chains+1}
109| | And Initialize layer ip4vxlan
110| | ... | count=${nf_total_chains} | start=${nf_chains+1}
111| | And Initialize L2 bridge domains for multiple chains with Vhost-User
112| | ... | nf_chains=${nf_total_chains} | nf_nodes=${nf_nodes}
113| | ... | start=${nf_chains+1}
114| | ${result}= | Stop Running Traffic
115| | Display Reconfig Test Message | ${result}
116
117*** Test Cases ***
118| tc01-118B-1c-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm1t-testpmd-reconf
119| | [Tags] | 118B | 1C
120| | frame_size=${118} | phy_cores=${1}
121
122| tc02-118B-2c-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm1t-testpmd-reconf
123| | [Tags] | 118B | 2C
124| | frame_size=${118} | phy_cores=${2}
125
126| tc03-118B-4c-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm1t-testpmd-reconf
127| | [Tags] | 118B | 4C
128| | frame_size=${118} | phy_cores=${4}
129
130| tc04-1518B-1c-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm1t-testpmd-reconf
131| | [Tags] | 1518B | 1C
132| | frame_size=${1518} | phy_cores=${1}
133
134| tc05-1518B-2c-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm1t-testpmd-reconf
135| | [Tags] | 1518B | 2C
136| | frame_size=${1518} | phy_cores=${2}
137
138| tc06-1518B-4c-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm1t-testpmd-reconf
139| | [Tags] | 1518B | 4C
140| | frame_size=${1518} | phy_cores=${4}
141
142| tc07-9000B-1c-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm1t-testpmd-reconf
143| | [Tags] | 9000B | 1C
144| | frame_size=${9000} | phy_cores=${1}
145
146| tc08-9000B-2c-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm1t-testpmd-reconf
147| | [Tags] | 9000B | 2C
148| | frame_size=${9000} | phy_cores=${2}
149
150| tc09-9000B-4c-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm1t-testpmd-reconf
151| | [Tags] | 9000B | 4C
152| | frame_size=${9000} | phy_cores=${4}
153
154| tc10-IMIX-1c-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm1t-testpmd-reconf
155| | [Tags] | IMIX | 1C
156| | frame_size=IMIX_v4_1 | phy_cores=${1}
157
158| tc11-IMIX-2c-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm1t-testpmd-reconf
159| | [Tags] | IMIX | 2C
160| | frame_size=IMIX_v4_1 | phy_cores=${2}
161
162| tc12-IMIX-4c-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm1t-testpmd-reconf
163| | [Tags] | IMIX | 4C
164| | frame_size=IMIX_v4_1 | phy_cores=${4}
165